产品功能描述:
供电方式:电池供电(可充电)
工作电压范围:DC 3.4V - 4.5V
工作电流:4V/平均 45mA
待机电流:4V/平均 5mA
休眠电流:4V/平均 3.1mA
内置电池容量:(3.7V聚合物电池)
6000 mAh -GT76A 121mm * 65 mm * 27mm(6000mA)
10000 mAh -GT76B 121mm * 65 mm * 33mm(10000mA)
20000 mAh -GT76C 121mm * 65 mm * 48mm(20000mA)
1.精准定位,精度达到5米。
2.GPS/北斗/LBS定位。
3.功能特点:超速报警、震动报警、电子栅栏、低电报警。
4.超长待机,磁吸附
5.平台终身免费
1. GPS+LBS Dual Positioning Ways: If the gps signal is good, the device will locate via gps satellite, if not, the device will locate via LBS! Under GPS locating mode, the accuracy is 5-10 meters, under LBS locating mode, the accuracy is 100-2000 meters;
2. Realtime Tracking: You will can realtime track the device on google maps via mobilephone, tablet and computer, and the minumum data upload interval is 10 seconds!
3. History Route Playback: The APP and web server can record the upload data of the device up to 6 months, you will can playback the history route at any time!
4. Long Standby Time: It has built-in 3.7V 20000mAh Li-ion battery, the standby time is up to 240 days and the working time is up to 15-20 days;
5. Powerful Magnetic: It has built-in powerful magnets, can be very easily installed.
6. Waterproof IP67: The waterproof level of this device is IP67, it can resist splash water but can't be put under water!
8. Overspeed Alarm: This alarm works only under continuous positioning mode.When the unit speed is exceed the speed you presetted, it will send message “speed alarm!” to the admin number every 5 minutes.
9. Shock Alarm: After you did the shake alarm setting,please keep the tracker being stationary for 5 minutes, then this function will start working. It will send SMS “sensor alarm!” to the admin number when the unit get shocked.
10. Movement Alarm: When the units stays immobile in a place for 10 minutes, the user can set up the movement alarm by this command "move+passord", then in case the device moved 500m it will send alarm SMS "Move Alarm+Latitude and longitude" to the authorized number.
11. Geo-fence:set up a geofence for the tracker to restrict its movements within a district. The unit will send alarm information to APP and web server when it goes out of or get in this district.
12. Sleep Mode for Saving Battery:
* Sleep by time mode: After did this setting, tracker will only work for 5 minutes after being waked up, and back to sleep mode, GPS will shut off and GSM will works in low consumption mode. SMS, call will can wake up the tracker.
* Sleep by shock sensor mode: After did this setting, if no shock for 5 minutes, the tracker will work under "sleep by shock" mode, GPS will shut off, GSM will works in low consumption. Vibration, SMS, call will can wake up the tracker.
13. Dropped Alarm: there has an anti-removal induction sensor on the back side of the device. If this covered induction sensor is not covered again, the device will send "Loosing alarms!" to the admin number and SOS number by SMS!le tracking